AFCA Forums Home
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Steve Cunningham, Rod Rogers, Larry Hancock
New Topic Reply Printer Friendly
Oscillating problem  Rate Topic 
 Posted: Sun Nov 19th, 2017 04:20 am
1st Post
Ernest Collins

Joined: Mon Oct 30th, 2017
Location: Spring, Texas USA
I need to pull and replace the adjustable oscillating wheel on my 79648 Emerson. I removed the set screw, but it will not come off. 

This wheel is not repairable is it? The threaded hole where the linkage is supposed to be attached is broken

Back To Top PMQuoteReply  

 Posted: Sun Nov 19th, 2017 10:18 am
2nd Post
Lane Shirey
AFCA Member

Joined: Wed Apr 30th, 2014
Location: Downingtown, Pennsylvania USA
If I recall, there might be 2 set screws holding the adjustable oscillator wheel onto the shaft. If not, then you'll have to use penetrant or a little heat with a heat gun. They are only slip fit so it should come off. 
No, there's not repairable as that knurled ring is crimped on to hold it all together. They're pretty common though and should be available if you post in BST section. 

Last edited on Sun Nov 19th, 2017 10:20 am by Lane Shirey

Back To Top PMQuoteReply

Current time is 08:57 pm  
AFCA Forums > Antique Fan Collectors Association > Post-1950 (Vintage) > Oscillating problem Top

Beige Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1497 seconds (19% database + 81% PHP). 27 queries executed.