View single post by Geoff Dunaway
 Posted: Sat Jun 9th, 2018 03:30 pm
PMQuoteReplyFull Topic
Geoff Dunaway



Joined: Fri Dec 23rd, 2005
Location:  
Status: 
Online
  Be sure to remember if you decide to tear that fan down ,that the motor handle is screwed thru the pot metal into the laminations of the motor. Also , the motor tag is nailed thru the pot metal into the laminations of the motor. You got to get the motor handle & ID tag off the top of the motor before anything will come apart in one piece. At least the back of the housing is in good shape.  Best of luck with this project.