View single post by Steve Stephens
 Posted: Mon Oct 8th, 2018 03:28 pm
PMQuoteReplyFull Topic
Steve Stephens

Joined: Mon Nov 14th, 2005
Location: San Anselmo, California USA
Several possibilities I think;The arm is not the correct one.
The arm is on upside down or reversed.

If the arm has a sideways bend and is installed incorrectly the bend could cause binding.   I've had this happen but not on an R&M and don't have one like yours to look at.

But I have these photos of a 6 wing List 2404 which might be the same.