View single post by John McComas
 Posted: Thu Nov 8th, 2018 10:38 pm
PMQuoteReplyFull Topic
John McComas



Joined: Mon Dec 4th, 2006
Location: Branson West, Missouri USA
Status: 
Offline
I've done several replacements without issue.
I think there are locating pins on the grill, and the screw to tighten the ring needs to be almost out.
The screw to tighten needs to be located at the bottom of the grill. 
Keep looking around and you will get it.  It has to be "just so".
Happy Fanning!