View single post by Stan Adams
 Posted: Mon Jun 3rd, 2019 04:47 pm
PMQuoteReplyFull Topic
Stan Adams



Joined: Mon Nov 14th, 2005
Location: Houston, Texas USA
Status: 
Offline
The spin down time sounds good, but I am concerned with the high temp at the blade shaft. No way it should be that hot which sounds like some serious friction is happening there. I would check to make sure you have enough lateral play in the rotor, it may be swelling & causing too much friction if there is not enough end play. You may also try taking the oscillator shaft out & running it to see if that makes any difference.