View single post by David Kilnapp
 Posted: Thu Jul 11th, 2019 07:46 pm
PMQuoteReplyFull Topic
David Kilnapp

 

Joined: Tue Apr 17th, 2018
Location: Pembroke, Massachusetts USA
Status: 
Offline
Yes definitely put the ohm meter on the three head wires and publish the results. You should get three distinct readings. Label the three wires A, B, and C and give the readings for a to b, b to c and a to c. THe fan should absolutely work if there is continuity on the three readings. Then at least you will know if the issue is the speed coil or a bad stator. Let's hope that it is the speed coil. Stators rewinds are expensive.