View single post by Steve Stephens
 Posted: Fri Oct 4th, 2019 04:51 pm
PMQuoteReplyFull Topic
Steve Stephens



Joined: Mon Nov 14th, 2005
Location: San Anselmo, California USA
Status: 
Offline
The wick springs as they came from the factory must have had enough tightness holding the wick that the wick did not move.  I find I have to "unscrew" the wick to remove and to screw it back in usually in the opposite direction to replace.  You should not be able to pull the wick straight through the spring.