Ed Teach
| Joined: | Sat May 9th, 2020 |
| Location: | |
| Status: |
Offline
|
|
I was wanting to check another Vornado to see what the draw for it was. I took a Vornado I rebuilt several months ago and plugged it in and it would hum and try to turn the rotor but would stop. I gave it a push and it would spin but only a couple of times and stop again. I took the motor apart and re greased it and oiled it up again just in case something was lodged in the bearing. The motor does not turn extremely free but it turn fairly free. I am at a loss on what to do next. Any help appreciated. https://youtu.be/jno7qDQl4i0
|