View single post by Ed Teach
 Posted: Thu Jan 7th, 2021 11:57 pm
PMQuoteReplyFull Topic
Ed Teach

 

Joined: Sat May 9th, 2020
Location:  
Status: 
Offline
I took the motor apart and cleaned and oiled it again, taking care to put it back together so the rotor spins free. Hooked up the wires direct and when plugged in it turns maybe an eighth of a turn and freezes. I also can not spin it like the magnetic is holding it in place. Unplug it and it spins good again.This has to be the stater correct?