AFCA Forums Home
Home Search search Menu menu Not logged in - Login | Register
AFCA Forums > Antique Fan Collectors Association > Post-1950 (Vintage) > Emerson 77648-TF Stator Resistance

 Moderated by: Steve Cunningham, Rod Rogers, Larry Hancock
New Topic Reply Printer Friendly
Emerson 77648-TF Stator Resistance  Rate Topic 
AuthorPost
 Posted: Fri Aug 3rd, 2018 06:05 pm
  PMQuoteReply
1st Post
Michael Stanko
Guest
 

Joined: Sun Jul 29th, 2018
Location:  
Status: 
Offline
Rookie here. First fan project. Turned a dirty and scratched, yet perfectly running fan into a beautiful, non running fan. Hums but doesn't turn...even if spun by hand to start. Wiring looks correct...both duplicated original + also checked against a dwg I found on this forum and it's the same. That wiring diagram included resistance on across the A-B and A-C legs on the stator. I match the A-B, but A-C and well as B-C shows infinite resistance or and open circuit. Ut oh. Even snipped the old cloth covered wire back to within 1" if the entry into the stator windings just in case that old wire had cracked...darm...same readings. Then searched and searched with jewelers magnifiers on for damage to the coil wires...bend or a break or a discolor. Zip. I was very caution not to get close to the winding when I locked the rotor from turning to unscrew the fan.
Sounds like my stator is shot. :cry:

Any ideas on next steps?  :hammer:

Mike  

I hate to see this head to the trash can. I must say these things are built like a tank. 

Back To Top PMQuoteReply  

 Posted: Fri Aug 3rd, 2018 06:47 pm
  PMQuoteReply
2nd Post
Lawrence Smith
AFCA Member


Joined: Sun Aug 4th, 2013
Location: Wichita, Kansas USA
Status: 
Offline
what fan model is it?  since it is the c leg that is open, try isolating it in the stator , you might get lucky & find the break. Someone might have a parts fan for you or rewind. Pics would assist.

Back To Top PMQuoteReply

 Posted: Sat Aug 4th, 2018 07:11 am
  PMQuoteReply
3rd Post
Levi Mevis
AFCA Member
 

Joined: Tue Feb 24th, 2015
Location: Elkhart, Indiana USA
Status: 
Offline
It sounds like he has an Emerson of some sort by the way he described the way he removed the blades from the fan (having to lock the rotor into place to unscrew the blade from the fan). 
In the thread title he said its a Emerson 77648 TF which I'm not sure what the "TF" designation means as I've never seen that designation before on an 77xxx fan before. 

Last edited on Sat Aug 4th, 2018 07:14 am by Levi Mevis

Back To Top PMQuoteReply  

Current time is 10:31 am  
AFCA Forums > Antique Fan Collectors Association > Post-1950 (Vintage) > Emerson 77648-TF Stator Resistance Top



Beige Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1625 seconds (23% database + 77% PHP). 28 queries executed.