AFCA Forums Home
Home Search search Menu menu Not logged in - Login | Register
AFCA Forums > Antique Fan Collectors Association > Post-1950 (Vintage) > Couple of nice Post-50s Fans Reworked Running Nice

 Moderated by: Steve Cunningham, Rod Rogers, Larry Hancock
New Topic Reply Printer Friendly
Couple of nice Post-50s Fans Reworked Running Nice  Rate Topic 
AuthorPost
 Posted: Wed Nov 6th, 2019 07:22 am
  PMQuoteReply
1st Post
Alex Rushing
AFCA Member


Joined: Thu Dec 14th, 2006
Location: Montgomery, Alabama USA
Status: 
Offline
First up:Polar Cub by A.C. Gilbert. Strong aluminum blades and high speed motor. This thing puts out more air than any other fan I have in the 10" or 12" class. The build quality looks to be lower-end at first glance, but there are a lot of things about it that make it quite good! 














































Second is:
Westinghouse Lively Air. Strong aluminum blades and a good speed running with adjustable oscillator. Super strong cage and innovative construction. 

































The Polar Cub paint looks good enough for me to not repaint it.
The Westinghouse fan will need a paint job. I am undecided between sail blue and sunrise red.  :hammer:

Both fans will have the blades high polished though, like they were from the factory. Really helps appreciate these later fans. :)

Funny what a quick breakdown of the motor, cleaning of old oil and grease, cleaning the bits/bobs, and new oil/grease can do. Both fans were rewired with new leads soldered on the stators. The Polar cub switch was bad, so I swapped it for a temporary push button until I find a turn know. I did swap broken/worn fiber washers out for new ones.


Last edited on Wed Nov 6th, 2019 02:42 pm by Alex Rushing

Back To Top PMQuoteReply  

 Posted: Fri Nov 8th, 2019 06:30 pm
  PMQuoteReply
2nd Post
Ryan Blazei
AFCA Member


Joined: Fri Sep 9th, 2016
Location: Green Bay, Wisconsin USA
Status: 
Offline
I’ve seen restorations of the Westinghouse in highly polished aluminum finish, and they look stunning. The aluminum housings are great for polishing.

Back To Top PMQuoteReply

 Posted: Mon Nov 11th, 2019 10:39 pm
  PMQuoteReply
3rd Post
Richard Daugird
AFCA Member
 

Joined: Tue Sep 12th, 2017
Location: Texas City, Between Hou. & Galveston, Texas USA
Status: 
Offline
Is it normal for those Westys to run really hot to the touch? My friend has a couple and they seem very hot, but then I'm used to cast and brass fans that are usually barely warm when running.

Could you possibly do a tutorial with picturs next time you take one apart? I'd like to take his apart and clean them inside.

Back To Top PMQuoteReply  

 Posted: Mon Nov 18th, 2019 01:28 am
  PMQuoteReply
4th Post
Levi Mevis
AFCA Member


Joined: Tue Feb 24th, 2015
Location: Elkhart, Indiana USA
Status: 
Offline
Richard Daugird wrote: Is it normal for those Westys to run really hot to the touch? My friend has a couple and they seem very hot, but then I'm used to cast and brass fans that are usually barely warm when running.

Could you possibly do a tutorial with picturs next time you take one apart? I'd like to take his apart and clean them inside.

Richard, it is normal for the shaded pole Westys like the Lively-Aires to run hot to the touch, because that's just the nature of those old Shaded Pole motors. Now those PSC Westys like the Power-Aires will not run hot to the touch because they are capacitor motors and those kinds of motors tend to run cool to the touch.

hope this helps.

-Levi

Back To Top PMQuoteReply

 Posted: Wed Nov 20th, 2019 06:04 am
  PMQuoteReply
5th Post
Alex Rushing
AFCA Member


Joined: Thu Dec 14th, 2006
Location: Montgomery, Alabama USA
Status: 
Offline
Ryan Blazei wrote: I’ve seen restorations of the Westinghouse in highly polished aluminum finish, and they look stunning. The aluminum housings are great for polishing.I am glad you made this suggestion, as I have honed my Aluminum polishing skills recently. However, where I plan to use the fan, a black/polished aluminum scheme would be more appropriate.  After looking at some polished resto jobs, I will be seriously considering this approach. Thank you, Ryan!

Back To Top PMQuoteReply  

 Posted: Wed Nov 20th, 2019 06:13 am
  PMQuoteReply
6th Post
Alex Rushing
AFCA Member


Joined: Thu Dec 14th, 2006
Location: Montgomery, Alabama USA
Status: 
Offline
Richard Daugird wrote: Is it normal for those Westys to run really hot to the touch? My friend has a couple and they seem very hot, but then I'm used to cast and brass fans that are usually barely warm when running.

Could you possibly do a tutorial with picturs next time you take one apart? I'd like to take his apart and clean them inside.
As Levi said, yes they do run hot. scarily so after many hours. But, as long as the amperage draw is within spec and the blades spin super freely and the oscillator mechanism is completely cleaned and re-greased, it should be considered absolutely safe. :)

I will definitely do a tutorial of the disassembly/reassembly when I break it back down for the cosmetic work.  :up:
Since it should be mostly disassembly and cosmetics, it may be soon I do this project! :)


See in the video where I turn the fan off, the spin-down is about 20 seconds, this should be a good goal when getting one of these is tip-top running shape(worn bearings can make it a little longer). Light weight blades and full-time oscillator gear train engagement make it a short spin-down fan usually, but getting it to 20 seconds lets me know there is no issue mechanically. And the amperage draw being within spec is confirmation the electrical is good to go.

Last edited on Wed Nov 20th, 2019 06:14 am by Alex Rushing

Back To Top PMQuoteReply

Current time is 04:53 am  
AFCA Forums > Antique Fan Collectors Association > Post-1950 (Vintage) > Couple of nice Post-50s Fans Reworked Running Nice Top



Beige Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.2303 seconds (43% database + 57% PHP). 31 queries executed.