AFCA Forums Home
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Steve Cunningham, Stan Adams, Rod Rogers
New Topic Reply Printer Friendly
Emerson 19646 stator question  Rate Topic 
AuthorPost
 Posted: Sun Sep 13th, 2020 03:50 pm
  PMQuoteReply
1st Post
David Kilnapp
AFCA Member
 

Joined: Tue Apr 17th, 2018
Location: Pembroke, Massachusetts USA
Status: 
Offline
Hello friends. Hope you are enjoying this fine (almost) fall weather. It's nice and cool in the Boston area. I've heard that it's still pretty warm in South Texas and California.
One of my "haul" fans is an Emerson 19646. It doesn't run. I suspected a bad stator so I removed the stator and tested the leads. Sure enough, no readings on one of the leads (probably the start windings are bad).

Antiquefanparts.com has a replacement stator for an Emerson 19666. I know the three last numbers refer to different things. Will this stator work as a replacement for the 19646? Would a rewind be a better idea?

Ideas/opinions please?

Back To Top PMQuoteReply  

 Posted: Sun Sep 13th, 2020 04:15 pm
  PMQuoteReply
2nd Post
Steve Stephens
AFCA Member


Joined: Mon Nov 14th, 2005
Location: San Anselmo, California USA
Status: 
Online
The diameter of the 19666 stator and motor case is larger than the 19646 so it could not be fit into the 19646 case.   Case closed so time for a rewind or wait for a stator to become available.

Back To Top PMQuoteReply

 Posted: Sun Sep 13th, 2020 04:20 pm
  PMQuoteReply
3rd Post
David Kilnapp
AFCA Member
 

Joined: Tue Apr 17th, 2018
Location: Pembroke, Massachusetts USA
Status: 
Offline
Thanks Steve. I appreciate the quick response!

Back To Top PMQuoteReply  

 Posted: Sun Sep 13th, 2020 08:05 pm
  PMQuoteReply
4th Post
Tom Newcity
AFCA Member


Joined: Sun Nov 27th, 2005
Location: Fort Smith
Status: 
Offline
David,
Rick Huckabee does a very nice job on those stators.  

Back To Top PMQuoteReply

 Posted: Sun Sep 13th, 2020 09:32 pm
  PMQuoteReply
5th Post
David Kilnapp
AFCA Member
 

Joined: Tue Apr 17th, 2018
Location: Pembroke, Massachusetts USA
Status: 
Offline
Thanks Tom. I'll email Rick.

Back To Top PMQuoteReply  

 Posted: Mon Sep 14th, 2020 04:47 am
  PMQuoteReply
6th Post
Dennis Lebow
AFCA Member
 

Joined: Thu Nov 17th, 2005
Location: Hollister, California USA
Status: 
Offline
David let me look to see if I have a good stator for your 19646 Emerson ..... 

Back To Top PMQuoteReply

 Posted: Mon Sep 14th, 2020 11:25 am
  PMQuoteReply
7th Post
Alex Rushing
AFCA Member


Joined: Thu Dec 14th, 2006
Location: Montgomery, Alabama USA
Status: 
Offline
Worst comes to worst, you can put a 29646 stator in and transplant the choke off the 29646 switch onto the 19646 switch. I did that until I saw a 21646 motor pop up on ebay. The 21646 stator is identical to the 19646 stator and works properly with the 19646 switch.
I recently got lucky and found a 29668 stator worked perfectly fine in a 17666, and using the 17666 switch at that. Coil runs cool and stator acts properly. Draws 10W over what the original did, but a cool choke means it is good to go. And the 29668 stator is superior in design, as the 17666, 19666, 19646, 21646, etc use the weak secondary nichrome windings. Those were phased out starting with the 276XC series I believe.

Back To Top PMQuoteReply  

 Posted: Mon Sep 14th, 2020 11:33 am
  PMQuoteReply
8th Post
David Kilnapp
AFCA Member
 

Joined: Tue Apr 17th, 2018
Location: Pembroke, Massachusetts USA
Status: 
Offline
Good to know Alex.

Back To Top PMQuoteReply

Current time is 05:44 pm  
AFCA Forums > Antique Fan Collectors Association > Pre-1950 (Antique) > Emerson 19646 stator question Top



Beige Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2008 Data 1 Systems
Page processed in 0.1515 seconds (9% database + 91% PHP). 28 queries executed.