View single post by David Kilnapp
 Posted: Mon May 3rd, 2021 11:10 pm
PMQuoteReplyFull Topic
David Kilnapp

 

Joined: Tue Apr 17th, 2018
Location: Pembroke, Massachusetts USA
Status: 
Offline
Stan is exactly right. You need to pull up on the fan first to remove the center pivot shaft before the side bolt will come out. The pictures below will help to explain.



You can see the set screw on the lower picture on the right. Unscrew that, then pull up on the fan so that the center shaft comes up and out of the neck. After that, you'll be able to push the side bolt out.

Last edited on Mon May 3rd, 2021 11:12 pm by David Kilnapp