View single post by Michael Bennett
 Posted: Tue Sep 7th, 2021 11:50 pm
PMQuoteReplyFull Topic
Michael Bennett



Joined: Mon Jul 25th, 2011
Location:  
Status: 
Offline
My dad bought  the same  fan new. Its been  in the attic for about  30 years. The blade is held on by rubber like a 50s ge strap fan and his fan was in the same  shape is yours.       So today I took  it down and I put a rubber  grommet  in  the  blade. I then used nylon spacers between the  motor  shaft and the rubber  grommet In the blade .  I  put two fender  washers  on  both sides of the blade . I then  used  what was left of a 10"  vortalex  hub to hold it together.