View single post by Ron Powell
 Posted: Sat Oct 31st, 2009 11:42 pm
PMQuoteReplyFull Topic
Ron Powell

Joined: Thu Mar 6th, 2008
Location: Fruitvale, Texas USA
Dave, A lead from the stator goes to the hi tap, one goes to an AC on the switch and one goes to the input to the choke coil. That's the way I wired my R&M 2410. You have two leads going to the hi tap, that may be the problem. And it looks like your going to have an extra lead off the coil for some reason. Two leads running off the photo from the coil. That's not the original coil so you just might not be able to use it at all.

Last edited on Sat Oct 31st, 2009 11:49 pm by Ron Powell